3Pole RF Handle

The RF current passes through the pad, and then back to the generator, via a negative grounding pad attached to the client’s lower back. It goes through all skin layers, reaching down to the fat layer 20mm below the surface.

Switches in RF applications need to have low insertion loss, high isolation, and high power handling capability. This application note addresses these requirements using a load pull-based approach.

-6 Polar Radio Frequency + Vacuum Handle

The 6 polar radio frequency handle is used to tighten or firm up the skin after the vacuum or cavitation handles are utilized. It heats up and emits red light which assists in breaking down the fat that has been damaged by the cavitation treatment. It is a small hand piece that can be used on areas like the Face, Cheek, Chin and Forehead.

Quadrupole RF radio frequency handles concentrate the thermal effect of RF on the deeper dermis layer of the skin, fast reaching 45-60 degrees centigrade, and make the collagen regenerate, and achieve skin lifting and skin firming reduce wrinkles effect. It is mainly used on cheeks, neck, double chin and arms.

Bipolar RF handles have poles in sets of two; negative and positive, so the RF current only flows through the small area between these poles, reaching a few millimeters below the skin. The current also flows to the surrounding cells, accelerating blood circulation, burning fat and improving skin elasticity. BS-UF7 machine has 40khz Cavitation Handle, 3D Vacuum+RF Handle for Body and Six-Polar RF Handle with Photon.

-Bi-Polar Radio Frequency Handle

RF devices use one or more electrodes to deliver a 3-Pole RF Handle high-frequency electric current to the skin. The current can be polar or unipolar, depending on how it’s delivered.

Bipolar RF devices consist of two parallel electrodes that don’t have a grounding pad. When a client’s face is placed between the two poles, the device delivers an RF treatment with a penetration depth half of the distance between the electrodes (2-4mm). This type of RF is commonly used in professional RF facial machines and at-home RF devices.

Unipolar RF is not as effective as a bipolar device and only penetrates through the layer of fat on top of the skin, not through all layers of tissue. Its effectiveness is also largely dependent on the cooling system used during the treatment.

The bi-polar RF hand-piece heats the collagen fibers to 45 °C – 65 °C and makes them tighter, which in turn helps to firm up the skin. It’s a small handle that can be used on areas like the face, cheeks, chin and forehead. It can also be used after the vacuum or cavitation handles have been utilized to help firm up 3-Pole RF Handle loose skin. This can help to eliminate a double-chin, pouch or black eye and can also be used to shrink pores. It also helps to stimulate the production of new cells and blood.

-Hot Hammer

The Hot Hammer is a portable face treatment tool that features two heads reaching different temperatures simultaneously. One head reaches a high temperature to relax muscles, increase blood circulation and open pores, while the other is used to apply cold to the skin which helps shrink enlarged capillaries. It also soothes inflamed or irritated skin, reduces redness and soothes itching.

This face RF treatment is particularly effective for those with oily or acne-prone skin, and it can also be used to treat wrinkles and stretch marks. It can also help eliminate dark spots and scars, as well as tighten and firm the skin.

Using the hot hammer is an excellent way to treat skin that has been damaged by chemical peels, waxing, microdermabrasion, active acne or rosacea. It opens up the pores and helps improve absorption of nutrients. It also increases the effectiveness of mesotherapy or injection treatments.

While monopolar RF only passes through the surface of the skin, bipolar RF has two poles in sets of two; negative and positive. It travels through all layers of the skin, reaching down to the fat layer 20mm below the surface. This makes it more effective for reducing fat, and it is recommended for clients looking for face or body slimming. It can also be used to reduce fine lines and wrinkles on the neck, face or arms.

-Cold Hammer

Aside from the projectile itself, one of the most important factors that distinguishes a rifle from other firearms is its barrel. The precise rifling that runs down its length is critical to accuracy, and the smooth bore surfaces produced by cold hammer forging are also key.

CHF barrels are renowned for their longevity and durability. They can withstand much more heat than other barrels and still remain accurate, even after firing thousands of rounds. This is mainly due to the extensive pounding that CHF does to the steel, which realigns its molecular structure and directional grain, resulting in superior rigidity and tensile strength. This makes them far more resistant to erosion than other barrels made using traditional methods.

For this reason, all Tikka rifles are cold hammer forged (CHF) for accuracy. The process starts with a short blank that is then placed against a hardened mandrel of the proper diameter and rifling pattern. The pair then goes into a machine that hammers the two together, forming and shaping them into their final shapes. The barely visible spiral patterns you see on some of these barrels are the imprints from all those hammers at work.

The Hot and Cold Hammer face function is a fantastic facial treatment tool that works in a number of ways. The hot hammer opens the pores of the skin and helps absorb treatment such as a face mask, while the cold hammer shrinks the blood vessels on the skin. This reduces inflammation, soothes inflamed or itchy skin and helps minimize wrinkles.